Discover Classes. Earn Rewards.

Scott Behr

Teaches at Metal Shop Fantasy Camp

Scott Behr learned about metal through working with it for 20 years. He decided to pass on the knowledge of how to weld with his company, Total Metal Resource, Inc. He lives with the desire to make things by hand and explore the fun of working with new tools, and let other people experience the unique satisfaction of fabricating metal into astounding works of art.

Reviews of Scott Behr

(137 Reviews)
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Lyon A. on 10/8/2019
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Natasa Z. on 4/27/2019
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Stuart B. on 3/31/2019
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Ric M. on 3/19/2019
    The experience was very informative. Looking forward to taking more classes.
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Robert M. on 2/12/2019
    Really good instructors, very safety conscience, good fun. I have a lovely cube now. Excellent intro adventure into how to weld and what is welding. Enough beginner welds to improve as one worked. I would like to spend some time learning wire speed, voltage, and how it corresponds to gauge of the steel, but I suppose this would be beyond a beginner. So this left me wanting more advanced classes. Thank you for the time the instructor and assistant took!
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Matthew H. on 2/11/2019
    Paul was a fantastic instructor. Patient and passionate about what he does, he displayed a wealth of knowledge tying in all kinds of information. My friends and I had a great time and it all flew by so fast. I'd highly recommend this class. Just fair warning that long grinding times definitely leaves some temporary soreness and loss of nerve sensitivity in your fingers.
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Vincent M. on 2/11/2019
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Beth B. on 2/10/2019
    Excellent class; instructor was knowledgeable and very patient. He worked with each of us to improve our skills.
  • How to Make a Cube: Intro to Metalworking

    Anonymous review on 2/4/2019
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Nicole I. on 1/13/2019
  • Introduction to Welding

    Reviewed by Nikola K. on 1/11/2019
  • How to Make a Cube: Intro to Metalworking

    Anonymous review on 12/3/2018
    This was an informative and enjoyable intro to metalworking class. The instructor and assistant were very knowledgeable, gave clear instructions and were great teachers. My only constructive feedback would be to provide students with some background reading material or Youtube videos ahead of class (I think this would be helpful for someone like me who has zero background knowledge) and have the opportunity to practice tacking and welding a bit before trying it on the actual cube. Overall, I had a very positive experience and look forward to trying the TIG welding class next.
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Victoria T. on 12/2/2018
    This class was a great introduction to MIG welding, in a relaxed atmosphere. Instructor was great as well.
  • Introduction to Welding

    Reviewed by Michael R. on 12/2/2018
  • Introduction to Welding

    Anonymous review on 11/20/2018
  • Introduction to Welding

    Reviewed by Jonathan P. on 11/18/2018
  • Boy Scout Merit Badge

    Reviewed by Edward H. on 11/3/2018
    My son and his friend took the welding merit badge course at the Metal Shop Fantasy Camp. What a great experience! The instructor, Mr. Scott Behr, could not have been more professional or kinder to the boys. His clear and concise teaching skills, and obvious expertise in and passion for welding, made the learning fun and pragmatic. He was patient, assuring, corrective and complimentary, all while ensuring safety. An excellent teacher! To coursehorse, your customer service is stellar.
  • How to Make a Cube: Intro to Metalworking

    Anonymous review on 5/20/2018
  • Introduction to Welding

    Reviewed by Regla R. on 5/12/2018
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Slavko N. on 5/7/2018
    Great instructors, great location!!Bravo!!
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Teri V. on 5/6/2018
    Both instructors were terrific.
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Gina P. on 5/6/2018
  • How to Make a Cube: Intro to Metalworking

    Anonymous review on 4/16/2018
  • Introduction to Welding

    Reviewed by Andre H. on 4/7/2018
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Karen M. on 4/2/2018
    Jeremiah was a great instructor and gave detailed direction. Had a blast and already signed up for the Finishing class. Michelle was also great - loved it!
  • Introduction to Welding

    Anonymous review on 4/2/2018
    It was good informative kind of wish we welded more than a hook. However with the time restrictions I get it, and for the cost not a bad buy.
  • Introduction to Welding

    Reviewed by Mike A. on 4/1/2018
  • Introduction to Welding

    Anonymous review on 3/31/2018
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Anthony B. on 3/26/2018
    The teacher was enthusiastic and patient. Gave us just enough space to fail a bit and learn. By the end of the class i really felt like I had a handle on MIG welding.
  • Introduction to Welding

    Reviewed by Lokke H. on 3/25/2018
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Michael M. on 3/2/2018
    Great class. The instructor was very knowledgeable and helpful. I learned a lot and will be back for the next class!
  • Steel Bowl Welding

    Reviewed by Hiroko O. on 2/26/2018
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Dan K. on 2/25/2018
    The class is exactly what I expected and more. The instructors were very vfiendky and encouraging each step of the way. At the end we all got to take home a cool steel cube we created.
  • Introduction to Welding

    Reviewed by Meagan C. on 2/18/2018
    The instructor was thorough and intuitive and really worked with each of us taking the class. Such a pleasure! Great start to an interesting trade.
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Jean M. on 2/4/2018
    Great class- very knowledgeable teacher and good 1 on 1 help. The project was perfect. Thanks
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Anthony R. on 2/3/2018
    The class was great. The instructor was even better. There was only one thing I would have liked to do. I would have liked to see how to set up the welder before we start welding.
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Gregory T. on 2/3/2018
    This was a refresher for me nonetheless it was a great introduction for anyone looking to give it a try. The equipment was in good shape. Most importantly Jeremiah was an excellent instructor; thorough, patient, helpful and an all round nice guy. I highly recommend this.
  • Introduction to Welding

    Reviewed by Victoria A. on 1/29/2018
    Great class! I learned a lot and I love that we started working right away!
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Jhavhet L. on 1/26/2018
  • Steel Bowl Welding

    Reviewed by Carly P. on 1/14/2018
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Jack L. on 1/13/2018
  • Steel Bowl Welding

    Reviewed by Dieter S. on 12/17/2017
  • How to Make a Cube: Intro to Metalworking

    Anonymous review on 12/17/2017
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Yousuf A. on 11/5/2017
    Every thing was excellent only that too many people in the class it should be less than 4 people and the time is a little bet long it should be around two hours
  • Introduction to Welding

    Reviewed by Yousuf A. on 11/5/2017
    Very satisfied with the course because only two in the class I received a lot of information
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Ali Y. on 10/30/2017
    The instructor Jeremiah (hope i spelled that right) was awesome as was Matt (the TA). Class was a lot of fun and learned a lot.
  • Introduction to Welding

    Anonymous review on 10/10/2017
  • How to Make a Cube: Intro to Metalworking

    Anonymous review on 10/8/2017
    Angel is very knowledgeable and has a great passion for welding which made the class enjoyable and fascinating. He was very hands on and was quick to anwer any questions or correct any troubles I had with the material. I would definitely like to continue the next step.
  • Introduction to Welding

    Reviewed by Virginia M. on 10/8/2017
    Great intro class and great instructor. Did actual welding and made a small hanger.
  • Introduction to Welding

    Reviewed by Erika D. on 10/1/2017
    Alex was a great instructor, got us working pretty quickly. We were able to do quite a bit in an hour
  • TIG Welding Level 1: Herb Planter Box

    Reviewed by STEPHAN W. on 9/24/2017
    Great class to learn . Teacher take time to explain and answer any questions you have. Thank again Jeremiah for this great class. I really enjoyed it and I will still practice to get better.
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Raul N. on 8/16/2017
    Angel Perez was very patient and truly knowledgeable. He was able to provide individual attention throughout the many phases of welding. We all got into what we were doing and looked to help each other. This class was truly educational and fun. I had a great time and will return for the Tig class.
  • Steel Bowl Welding

    Reviewed by Maryanne R. on 8/13/2017
    Fabulous class!!!
  • How to Make a Cube: Intro to Metalworking

    Reviewed by William L. on 8/13/2017
    Under the circumstances the instructor did a great job. The reason for the middling review was owing more to the facility. The staff working in the shop during the class meant that the available work space was reduced considerable and there was a moments of dodging out of people's way. The shop was also quite dirty. In terms of getting that was not a problem since you expect a bit of that when working with metal. The issue is that for beginners with little or no experience working in a shop it sets the norm for how a shop should be and that is bad if pursue the craft further. The limited amount of equipment relative to the class size was also an issue and meant that people spent a fair bit of time waiting around to do what they need to do. Finally, working with metal in a shop on a warm day makes you thirsty and there was no fountain, vending machine or other source of water apart from cupping you hands under the bathroom sink. It wasn't a major issue as we eventually got some bottles of water from the deli a few block away but it would have been a good thing to know in advance. On the whole the course was helpful and informative but could be greatly benefited by better plan, running a cleaner shop and thinking about class size relative to resources.
  • Introduction to Welding

    Reviewed by Gonzalo M. on 7/23/2017
    The instructor Petter was excellent, I would like to have more time to learn how to finish and polish the welding.
  • Introduction to Welding

    Reviewed by Dieter S. on 7/16/2017
  • Introduction to Welding

    Reviewed by Sergio P. on 7/16/2017
  • Introduction to Welding

    Reviewed by Herbert W. on 7/16/2017
    Small class size was perfect to allow for individual instruction
  • Introduction to Welding

    Reviewed by Duane M. on 6/26/2017
    Definitely interested in more Welding Classes Peter is an Awesome Instructor
  • TIG Welding Level 1: Herb Planter Box

    Reviewed by Byron G. on 6/11/2017
  • Introduction to Welding

    Anonymous review on 6/11/2017
  • How to Make a Cube: Intro to Metalworking

    Anonymous review on 6/3/2017
    Tons of fun! We had a group of 6 and 2 instructors both of whom
  • How to Make a Cube: Intro to Metalworking

    Anonymous review on 5/22/2017
    Great class. I give it 4.5/5. Half point off only because we didn't get to grind our welds (which was a stated part of the curriculum), because we ran out of time, due to reasons that were not too clear to me. Otherwise great class, and will go back for the finishing class as soon as I can.
  • Introduction to Welding

    Reviewed by Jamison P. on 5/14/2017
  • How to Make a Cube: Intro to Metalworking

    Anonymous review on 5/13/2017
    Fun class. We had 4 people in the class which gave the instructor some time to spend with all of us and some room to spread out our things. I would suggest that the class be limited to this size. I understand it can be as much as 8 and I would have been unhappy with that dynamic.
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Daniel H. on 5/7/2017
  • How to Make a Cube: Intro to Metalworking

    Reviewed by ALEXANDRA P. on 5/6/2017
  • Introduction to Welding

    Anonymous review on 4/2/2017
    Intro to welding has a lot of potential to be a fun and informative class but about half the class was taken up with prep work (welding jackets, waivers, setup of welding machines, etc.) most of which ought to have been done before we arrived. The instructor just didn't seem prepared. The class ended with a hard sell of the longer 4-hour followup classes.
  • Introduction to Welding

    Reviewed by Michele M. on 3/27/2017
  • Steel Bowl Welding

    Reviewed by Richard G. on 3/26/2017
  • How to Make a Cube: Intro to Metalworking

    Anonymous review on 3/25/2017
  • How to Make a Cube: Intro to Metalworking

    Anonymous review on 3/19/2017
    Great class, very knowledgeable staff , covering all bases. Expect a physically challenging 4 hours of solid work, no games.
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Kyle M. on 3/9/2017
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Chris R. on 2/27/2017
    Great class and great instructor. Overall great.
  • How to Make a Cube: Intro to Metalworking

    Anonymous review on 2/26/2017
  • Introduction to Welding

    Anonymous review on 2/18/2017
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Rob A. on 2/11/2017
  • Introduction to Welding

    Reviewed by Kate H. on 1/29/2017
    Michelle is great!
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Leo W. on 1/20/2017
    Fun and very hands-on class that does a great job of teaching you metalworking and MIG welding basics without spending too much time on theory. That being said, the instructors are more than happy to answer metalworking-related questions. If you're someone (like me) who doesn't just want to learn how to do something, but also wants to understand the underlying processes, I recommend watching some YouTube videos and reading though some How-To's before or after the course. All in all highly recommended!
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Josh T. on 1/15/2017
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Jon L. on 1/8/2017
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Heather K. on 1/8/2017
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Mariah R. on 12/30/2016
  • How to Make a Cube: Intro to Metalworking

    Reviewed by George H. on 12/30/2016
    Great class. Michelle's was a great instructor. Real fun and learned the basics, got what I wanted. I'll be going back for TIG class.
  • Introduction to Welding

    Reviewed by Debra L. on 10/16/2016
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Frederick D. on 10/9/2016
  • Introduction to Welding

    Reviewed by Geoffrey M O. on 9/19/2016
  • How to Make a Cube: Intro to Metalworking

    Anonymous review on 8/1/2016
    Great class and I learned a lot and was able to make the cube (though it came out more on the abstract side). I accomplished this even though I essentially never even picked up a power tool before. The place was also sensible and accommodating. The original class was smartly cancelled due to the heat dome, and they were able to accomodate my request to be put into the next weekend's class. I've already signed up for the second class to take my cube to the next level.
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Brandy H. on 7/31/2016
  • How to Make a Cube: Intro to Metalworking

    Anonymous review on 7/15/2016
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Franco P. on 7/9/2016
  • TIG Welding Level 1: Herb Planter Box

    Reviewed by Dmitrii V. on 6/26/2016
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Paul M. on 6/24/2016
    This is a brilliant class and a great way to learn welding. The instructors are very friendly, knew every aspect of welding and presented the lesson in a very clear and concise way. I definitely plan to go back.
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Damion T. on 6/23/2016
    This was such an amazing class. Didn't know if this was going to be easy to get as I had no experience doing work like this. The teachers were great and very patient. You just get it. I couldn't believe I had an actual cube at the end that didn't look silly. I was actually proud of my output. I ready for the next class.
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Dmitrii V. on 6/18/2016
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Joe T. on 6/13/2016
    Really fun class. Michelle and O never treated me like I was an idiot, which is great as I can occasionally be a bonehead when learning new things. Totally hands on, and I got to ask a ton of questions.
  • Introduction to Welding

    Reviewed by Alberto H. on 6/8/2016
  • Introduction to Welding

    Reviewed by Vincent C. on 5/21/2016
  • Introduction to Welding

    Reviewed by Nicholas R. on 5/1/2016
    Great class! Scott did a great job. Nice and friendly. Very safe! Would highly recommend it!
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Diane S. on 4/29/2016
    Great Class. Very nice and patient instructors. It was a tough course, but it was well worth it, since we all learned quite a bit on a subject we had no knowledge of. So happy to have made a metal cube.......almost done. I would definitely recommend this class to friends.
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Esther E. on 4/26/2016
    The welding class was excellent. We had Michelle as our instructor and she was incredibly detailed and patient. Welding can be a difficult task but she made it approachable and was very understanding of my first time mistakes. I enjoyed learning something new and also useful!
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Karen G. on 4/24/2016
    Instructors knowledgeable, very patient wonderful experience. Can't wait for finishing class
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Philip S. on 4/18/2016
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Richard B. on 4/9/2016
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Macgregor S. on 4/9/2016
  • How to Make a Cube: Intro to Metalworking

    Anonymous review on 4/6/2016
    Good class - wish we would have spent a little more time welding and learning technique but enjoyed the class
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Yesica M. on 3/21/2016
  • How to Make a Cube: Intro to Metalworking

    Reviewed by william m. on 3/20/2016
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Aisha H. on 3/18/2016
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Elliott D. on 3/15/2016
    Top notch concept and execution. Scott was fantastic. Highly recommend this for all ages.
  • How to Make a Cube: Intro to Metalworking

    Reviewed by charlie b. on 3/8/2016
  • How to Make a Cube: Intro to Metalworking

    Reviewed by pat d. on 3/4/2016
  • Introduction to Welding

    Reviewed by Elliott D. on 2/6/2016
  • TIG Welding Level 1: Herb Planter Box

    Reviewed by Chaney T. on 2/2/2016
  • Introduction to Welding

    Reviewed by Crystal G. on 2/1/2016
    I loved the course! Five stars. It was hands on, to the point, and informative. Not to mention safe and the instructors were personable and encouraging. I signed up for the next two levels of classes on the spot and I think welding may become a personal hobby of mine going forward!
  • Introduction to Welding

    Reviewed by Elliott D. on 1/31/2016
    Incredible class. Short sweet and gets you motivated to learn more...!
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Eric M. on 1/23/2016
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Dane S. on 1/23/2016
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Stephanie S. on 12/21/2015
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Nathan P. on 12/20/2015
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Peter K. on 12/20/2015
  • Introduction to Welding

    Reviewed by christine m. on 12/20/2015
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Giuliano M. on 12/20/2015
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Steven H. on 11/22/2015
  • Introduction to Welding

    Anonymous review on 11/22/2015
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Mitchell R. on 11/8/2015
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Brad S. on 11/8/2015
    My son in law signed us up for the class for both a joint experience and learning an additional skill. Instruction was thorough, hands on training that had you do every step beginning to end. We had a few in the class that were learning job skills, but half the class were furthering their hobby and entertainment skills. I would recommend this class to any one wanting a good experience and adding life skills. Brad Kansas
  • Introduction to Welding

    Reviewed by Michael D. on 10/4/2015
  • Introduction to Welding

    Reviewed by Andy P. on 8/9/2015
  • How to Make a Cube: Intro to Metalworking

    Anonymous review on 8/1/2015
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Casey G. on 6/13/2015
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Warren v. on 5/26/2015
  • How to Make a Cube: Intro to Metalworking

    Anonymous review on 4/11/2015
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Robert A. on 4/4/2015
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Mark C. on 3/20/2015
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Claire D. on 2/23/2015
  • How to Make a Cube: Intro to Metalworking

    Reviewed by Ryan L. on 2/23/2015
    Very helpful and very knowledgeable teachers is a well lit and perfect atmosphere. Very hands off once preliminary instructions given, unless you want them to help you further. You really get the feeling of accomplishment when learning this way, it doesn't feel like they "did all the work."

Classes taught by Scott Behr

View all courses taught by this teacher

CourseHorse Gift Cards

  • Creative & unique gift for any occasion
  • Thousands of classes & experiences
  • No expiration date
  • Instant e-delivery (or choose a date)
  • Add a personalized message
  • Lock in a price with the Inflation Buster Gift Card Price Adjuster™
Buy a Gift Card
gift card with the CourseHorse logo gift card with the CourseHorse logo
Loading...